Cambium Networks radiolines

1.2. PMP400

PMP400 is a solution which enables the construction of point-to-multipoint networks in the unlicensed bandwidth 5,4 GHz.

PMP400 is using an OFDM modulation, which enables the usage of this technology even in cases, where it is not possible to maintain the clear line of sight (LOS):

• nLOS – line of sight, Fresnel zone is partially covered
• NLOS – no line of sight, Fresnel zone is completely covered

Bandwidth of this solution has been improved up to 21 Mb/s.

Access module with external antenna.

1.3. PMP430

The radio system point-to-multipoint, which operates in the unlicensed bandwidth 5,4GHz.
In contrast to the previous radio systems (PMP100 and PMP400), it enables higher speed of signal transmission in a shorter time delay.
This solution is ideal for networks where the quality of service (so-called. QoS) is of great importance.

This system is perfectly suited for those environments where line of sight is completely or partially covered:

• nLOS – line of sight, Fresnel zone is partially covered
• NLOS – no line of sight, Fresnel zone is completely covered

Transmission speed obtained with this solution is up to 40 Mb/s.
Land cover using one module AP is 90 degrees, and the range is up to 64km.
Such a large range is achieved by using a LENS antenna or a reflector for subscriber module.

PMP430 system is compatible with previous solutions. Access modules AP may cooperate with PMP400 subscriber modules.

1.4. PMP320

The system enables the production of point-to-multipoint solutions in the licensed band of 3.3 to 3.8GHz.
It is compatible with the WiMAX 802.16e standard. This solution is based on the OFDM modulation and MIMO technology.
This allows up to 45 Mb/s data transfer rate per sector in a radio channel width of 10 MHz.
PMP320 enables stable operation with: clear line of sight – LOS, partially blocked line of sight – nLOS or completely blocked line of sight – NLOS.
The area coverage is up to 40 km.

With an AP-module, the surface is covered with a beam width of 90 degrees. Omnidirectional coverage is obtained by the use of three modules.

Available frequencies:

• PMP33320 – 3,3 to 3,4 GHz
• PMP33520 – 3,4 to 3,6 GHz (including 3,5 GHz)
• PMP36320 – 3,6 to 3,8 GHz (including 3,65 GHz)

Each solution has a possibility of setting four different beam widths: 3,5/5/7/10MHz.

2. Point-to-point equimpent

A dedicated solutions which are enabling creation of the wireless, point-to-point connections. Motorola offers a wide range of solutions for a reliable and efficient network connections.
The suggested solutions are working in the licensed bands 5,4 GHz and also 11, 18, 23 and 26 GHz.

2.1. PTP300

Wireless radio connections which operate in the unlicensed band 5,4 GHz (and 5,8 GHz – not available in Poland).
The maximum throughput of this wireless bridge is 25 Mb/s. PTP300 series have a high sensitivity and output power in its class, resulting in a wide operation range (up to 250km).

The PTP300 solution is available in two variants:

• Model Integrated – solution based on integrated antennas of dual polarization, ideal for environments with large amounts of interference and obstacles.
• Model Conectorized – solution based on modules of “Model Integrated”, which uses external, high-gain antennas. This type of solution is ideal for long distances and unfavorable conditions.

The PTP300 solutions is based on iOFDM modulation, which additionallu utilizes MIMO technology.
This solution makes it possible to transmit the signal in different frequencies or lower frequency ranges, providing improved spectral efficiency, immunity to multipath propagation and dropouts.
Protection: Motorola Software for the wireless bridge enables the communication with its counterpart on the other side, additionally encrypting the transmission. 128 and 256 bit AES encryption can also be used.

2.2. PTP500

Wireless radio connections which operate in the unlicensed band 5,4 GHz (and 5,8 GHz – not available in Poland).
The maximum throughput of this wireless bridge, made in Ethernet technology, is 105 Mb/s. This solution enables the additional usage of T1/E1 lines.
PTP500 series have a high sensitivity and output power in its class, resulting in a wide operation range (up to 250km).

The PTP500 solution is available in four variants:

• Model Integrated – solution based on integrated antennas of dual polarization, ideal for environments with large amounts of interference and obstacles. Throughput of this variant is 105 Mb/s.
• Model Integrated Lite – cheaper alternative of the Integrated solution. The only differce is in available throughput, which has been limited to 52 Mb/s.
  With increasing demand, there is a possibility to buy a software key for the full version.
• Model Conectorized – solution based on modules of “Model Integrated”, which uses external, high-gain antennas. This type of solution is ideal for long distances and unfavorable conditions. Throughput of this variant is 105 Mb/s.
• Model Conectorized – cheaper alternative of the Conectorized solution. The only differce is in available throughput, which has been limited to 52 Mb/s.
  With increasing demand, there is a possibility to buy a software key for the full version.

2.3. PTP600

Wireless radio connections which operate in the unlicensed band 5,4 GHz (and 5,8 GHz – not available in Poland).
The maximum throughput of this wireless bridge, made in Ethernet technology, is 300Mb/s. This solution enables the additional usage of T1/E1 lines.
PTP500 series have a high sensitivity and output power in its class, resulting in a wide operation range (up to 250km).

The PTP600 solution is available in four variants:

• Model Integrated – solution based on integrated antennas of dual polarization, ideal for environments with large amounts of interference and obstacles. Throughput of this variant is 105 Mb/s.
• Model Integrated Lite – cheaper alternative of the Integrated solution. The only differce is in available throughput, which has been limited to 52 Mb/s.
  With increasing demand, there is a possibility to buy a software key for the full version.
• Model Conectorized – solution based on modules of “Model Integrated”, which uses external, high-gain antennas. This type of solution is ideal for long distances and unfavorable conditions. Throughput of this variant is 105 Mb/s.
• Model Conectorized – cheaper alternative of the Conectorized solution. The only differce is in available throughput, which has been limited to 52 Mb/s.
  With increasing demand, there is a possibility to buy a software key for the full version.